Soldering Fluxes

It is a halogen-free, modified rosin, low solids solvent designed for wave soldering conventional and surface mount circuit board assemblies.

It is a water soluble organic activated flux. Flux- 103 is especially adaptable for foam fluxing, however, it can also be applied by dipping or brushing. It is used where inorganic fluxes are too corrosive to use and rosin fluxes are too inactive for the application. It is essential that the flux residues be completely and adequately removed.

We are the leading supplier of Soldering Flux-708.

It is a halogen-free, Synthetic Resin, low solids solvent system designed for similar application as Flux-708. It contains synthetic resin.

Soldering Flux - OP64

It is a solvent based, acidic solution used prior to soldering the stainless steel surface. It is primarily used to clean the stainless steel surface by removing organic contaminants and oxides. It has a specific gravity of 1.5.

WE are the leading supplier of Soldering Flux-638.

It is a liquid solution with approximately 38% solids containing ww rosin with activators and surfactants.
the chlorides are approximately 0.2%

We are the leading supplier of Copper Flux - ZC40

It is an acidic solution used prior to soldering the brass or copper surfaces. It is primarily used to clean the brass and copper surface by removing organic contaminants and oxides.

It is a VOC-free, halogen-free foamable flux with low solids water based system. Although it is a no clean flux  the flux residues are water soluble and can be cleaned with deionized water.

Soldering Flux - RN 40:

It is a liquid solution with approximately 40% solids containing WW rosin in solvents system without any activating agent.

Flux- 205 (I.R.)

It is an organic liquid formulation developed for use in reflow of solder plated printed circuit boards by infra-red fusing equipment. The residue of icm 205 is completely soluble in water.